Ac97 Audio; Usb Controller; Super Io Device; Onboard Fdc Controller - Albatron KX400+ Pro-C User Manual

AC97 Audio

This option allows you to control the onboard AC97 audio.
Options: Auto (default)、Disabled
Onboard Audio Codec
This option allows you to control the onboard audio codec.
Options: Enabled (default)、Disabled
AC97 Modem
(with KX400+ & KX400+ PRO)
This option allows you to control the onboard AC97 modem.
Options: Auto (default)、Disabled

USB Controller

This option should be enabled if your system has a USB port installed on the system
board. You will need to disable this feature if you add a higher performance controller.
Options: Enabled (default)、Disabled
USB Device Support
Enables support for USB attached keyboards. Options: Disabled (default)、Enabled

Super IO Device

If you highlight the literal "Press Enter" next to the "Super IO Device" label and then
press the enter key, it will take you a submenu with the following options:

Onboard FDC Controller

Select Enabled if your system has a floppy disk controller (FDC) installed on the
system board and you wish to use it. If you install anadd-in FDC or the system has
no floppy drive, select "Disabled" in this field. Options: Enabled (default)、Disabled

Onboard Serial Port 1

Select an address and corresponding interrupt for the first serial port.
Options: Disabled、 3F8/IRQ4 (default)、 2F8/IRQ3、 3E8/IRQ4、 2E8/IRQ3、 Auto

Onboard Serial Port 2

Select an address and corresponding interrupt for the second serial port.
Options: Disabled、2F8/IRQ3 (default)、3F8/IRQ4、3E8/IRQ4、2E8/IRQ3、Auto.

UART Mode Select

This item allows you to select the Infra Red (IR) standard to be used of onboard I/O
chip. Options: Normal (default)、AS KIR、 IrDA.
KX400+ series mainboard
52