Usb Controller; Super Io Device; Onboard Fdc Controller; Onboard Serial Port 1 - Albatron kx600s Instruction Manual

Table of Contents

Advertisement

KX600S PRO/ KX600S

USB Controller

This option should be enabled if your system has a USB port installed on the system board. You will
need to disable this feature if you add a higher performance controller.
Options: All Enabled (default)、All Disabled
OnChip EHCI Controller
This option should be enabled if your system has a USB 2.0 device installed on the system board.
You will need to disable this feature if you install a USB 1.1 device.
Options: Enabled (default)、Disabled
USB Device Support
Enables support for USB attached devices. Options: Disabled (default)、Enabled

Super IO Device

If you highlight the literal "Press Enter" next to the "Super IO Device" label and then press the enter
key, it will take you a submenu with the following options:

Onboard FDC Controller

Select Enabled if your system has a floppy disk controller (FDC) installed on the system board and
you wish to use it. If you install an add-in FDC or the system has no floppy drive, select "Disabled"
in this field. Options: Enabled (default)、Disabled

Onboard Serial Port 1

Select an address and corresponding interrupt for the first serial port.
Options: Disabled、 3F8/IRQ4 (default)、 2F8/IRQ3、 3E8/IRQ4、 2E8/IRQ3、 Auto

Onboard Serial Port 2

Select an address and corresponding interrupt for the second serial port.
Options: Disabled、2F8/IRQ3 (default)、3F8/IRQ4、3E8/IRQ4、2E8/IRQ3、Auto.

Onboard Parallel Port

This item allows you to determine the parallel port interrupt and address.
Options: 378/IRQ7 (default)、278/IRQ5、3BC/IRQ7、Disabled
35
This Manual: http://www.manuallib.com/file/2538033

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx600s pro

Table of Contents