Table of Contents
Advertisement
Onboard Device
If you highlight the "INTEL OnChip PCI Device" label and then press the enter key, it will take you
a submenu with the following options:
USB Controller
T
his option should be enabled if your system has a USB port installed on the system board.
n
eed to disable this feature if you add a higher performance
Options: Enabled (default)、Disabled
USB 2.0 Controller
This option should be enabled if your system has a USB 2.0 device installed on the system board.
You will need to disable this feat
Options: Enabled (default)、Disabled
USB Keyboard Support
Enables support
for USB att ched keyboards. Options: Disabled (default)、Enabled
AC97 Audio
This item allows you to control
Onboard LAN Con
This item
allows you to enable or disable onboard LAN Controller.
Options: Enabled (default)、
Onboard I/O Chip Setup
P
WRON After PWR-Fail
This field will determine whether your s
you select "On", the system will boot whether or not the system was on before power failure. If you
select "Former-Sts", the system will be restored to the status before the power failure.
Options: Off (default)、On、Former-Sts
Power On Function
This option allows you to se
Mouse Left、Mouse Right、Any KEY、BUTTON ONLY (default), and Key
KB Power On Password
Supply a password
that your system will use as part of the power-on sequence. This field is only
configurable when "Power On Function" is s
ure if you install a USB 1.1 device.
a
the onboard AC'97 audio. Options: Auto (default)、Disabled
trol
Disabled
ystem will boot after restoring power after a power failure. If
lect a way to power on your computer. Options: Password、Hot KEY、
et to "Password".
31
PX865PEL-800
controller.
board 98
You will
Advertisement
Table of Contents
