Using The 7720P Programming Tool - Honeywell GSMX Installation And Setup Manual

GSMX Installation and Setup Guide

Using the 7720P Programming Tool

Ensure the GSMX is powered, and connect
the 7720P Programming Tool.
Each key has two possible functions; a Normal function and a Shift function.
•
To perform a Normal key function, simply press the desired key.
• To perform a Shift function, press the [shift] key, then press the
appropriate key.
The following table lists each normal and shift key function.
7720P Normal and Shift Key (shift LED lit) Functions
KEY NORMAL KEY FUNCTION
BS/ESC [BS]: Press to delete entry
↓/↑
[↓]: Scroll down programming
N/Y [N]: Press for "NO" answer
SHIFT Press before pressing a SHIFT key function. Will light SHIFT LED. LED
goes out once a key is pressed. Press again for each SHIFT function
desired.
1/A [1]: For entering the number 1
2/B [2]: For entering the number 2
3/C [3]: For entering the number 3
4/D [4]: For entering the number 4
5/E [5]: For entering the number 5
6/F [6]: For entering the number 6
7/S [7]: For entering the number 7
8/T [8]: For entering the number 8
9/X [9]: For entering the number 9
TEST MESSAGE/REGISTRATION
Switch
SHIFT + KEY FUNCTION
[ESC]: Press to quit program mode;
also can reset programming
defaults.*
[↑]: Scroll up programming
[Y]: Press for "YES" answer
[A]: For entering letter A
[B]: For entering letter B
[C]: For entering letter C
[D]: For entering letter D
[E]: For entering letter E
[F]: For entering letter F
[S]: For entering letter S
[T]: For entering letter T
[X]: For entering letter X
– 9 –