Program - Ricoh FT7950 Operating Instructions Manual

COPYING

PROGRAM

You can store frequently used copy job set-
tings in machine memory and recall them for
future use.
The following program functions are available:
Store Program
Adds a job you want to run repeatedly and
delete the program.
Recall Program
Invokes a stored program.
Limitation
You cannot run neither Store Program nor
Recall Program functions in the Interrupt
mode.
Note
This copier is already set the Duplex mode
[1 Sided → 2 Sided] to the "Program 10"
at the factory.
You can store a maximum of 10 programs.
You can add the following functions as pro-
grams:
• Special Original
• Auto Image Density/Manual Image
Density/Half Tone
• Auto Paper Select
• Paper Tray/Bypass Tray
• Sort/Stack/Staple
• Punch
• Preset Reduce/Enlarge/Auto Reduce/
Enlarge/Create Margin/Zoom
• Duplex/Series Copies/Combine
• Save/Delete Area/Erase Border/Erase
Center/Border
• Centering/Margin Adjustment
• Cover/Slip Sheet
• Copy Quantity
Programs are not cleared by turning the
power off or by pressing the {Clear Modes/
Energy Saver} key. They are canceled only
when you delete or store the other program.
The default program is assigned to Program
No. 10 at the factory.
You can specify whether an ordinary pro-
gram or the default program assigned to
Program No. 10 is to be called at power-on
time or an auto clear occurs. See => P.96
38
"Default Setting."
Storing Program
Use this function to add a program you want
to use repeatedly.
1
Edit the copy settings.
2
Press the {Program} key.
The Program indicator appears.
3
Press the [Store program] key.
4
Press the number of the program you
want to store.
appears when the storage of the pro-
gram is completed.
Note
Program numbers for which the
dicator is illuminated are already assigned
a program.
in-