Table of Contents
Advertisement
WHAT TO DO IF SOMETHING GOES WRONG
CHANGING A PAPER SIZE
Reference
For paper sizes and types that can be set in
each tray, see ⇒ P.14 "COPY PAPER."
Changing the paper size for tray 2
1
Make sure that the paper tray is not be-
ing used and pull the paper tray until it
stops.
2
While pressing the release lever, adjust
the side and back fences to the size of
paper to be set.
86
3
Square the paper and set it in the tray.
Important
Do not stack paper over the limit mark.
Make sure that the paper is aligned at the
right.
Note
Take out any curls or correct any warpage
of the paper before setting.
PG6A1201
4
Set the paper size selector knob on the
rear part of the paper tray to the new
paper size and orientation.
PG6A1901
PG6A2001
Advertisement
Table of Contents
