Ricoh FT7950 Operating Instructions Manual page 82

COPYING
2
Press the [Paper Designate] key.
3
Enter the number of the page to be cop-
ied onto paper designate sheets using the
{Number} keys, then press the {#} key.
Repeat this step to specify all page des-
ignates.
Note
If you make a mistake, press the corre-
sponding designate number and press ei-
ther [Clear] key or reenter the correct num-
ber.
4
When specifying all designate pages,
68
press the [OK] key.
When the number of originals is
known
A Enter the number of originals with the
{Number} keys, then press the {#} key.
B Press the [OK] key.
C Set your originals in the document feeder
and press the•{Start} key.
When the number of originals is
unknown
A Press [Autocount] key.
B Set your originals in the document feeder
and press the [Start Count] key. The
number of originals is shown when
counting is completed.
C Press the [OK] key.
D Reset your originals in the document
feeder and press the {Start} key.