Table of Contents
Advertisement
PANEL DISPLAY
The panel display shows operational status, error messages, and function menus.
Important
Do not apply a strong stock or force of about 30 N (about 3 kgf) or more to the panel display.
Otherwise, the display might be damaged.
Note
The function items displayed serve as selector keys. You can select or specify an item by
lightly pressing it.
When you select or specify an item on the panel display, it is highlighted like
Keys appearing as
Displays And Key Operations
This machine has two types of initial display: "Normal" and "Program 10." "Program 10" is
enabled at the factory.
Factory set initial display (1-Side→2-Side is selected whenever the copier is reset.)
Initial display ("Normal" selected in "Default Setting") ⇒ ⇒ ⇒ ⇒ ⇒ See page 96.
1.
Display function items. When you select an item, the next screen appears under these keys.
2.
Displays operational status or messages. It also displays the number of originals the
copier has scanned.
3.
The number of originals set and the number of copied sheets are displayed.
4.
The types (paper size and orientation) of the paper set in the paper trays are displayed.
5.
The preset reduce/enlarge ratios are displayed.
6.
The options that can be selected in the sort/stack/staple/punch functions are displayed.
8
cannot be used.
1
7
2
.
3
4
5
6
Advertisement
Table of Contents
