Recalling A Program - Ricoh FT7950 Operating Instructions Manual

Delete the program
1
Identify and verify the stored program.
Note
To examine a stored program, call that pro-
gram. See ⇒ P.39 "Recalling a Program."
2
Press the [Store Program] key.
3
Press the number of the program you
want to delete.
4
Press [Yes] , when you want to delete.
Important
The deleted program cannot revival.

Recalling a Program

This function invokes a stored program.
1
Press the {Program} key.
The Program indicator appears.
2
Press the number of the program you
want to recall.
The contents of the stored program appear.
Note
Programs Nos. for which the
tor is not illuminated are assigned no pro-
gram.
3
Set your originals and press the {Start}
key.
Note
A message may be displayed when you re-
call a program if you changed the paper
size of the stored paper tray after storing
that program.
When you store a program "Create Mar-
gin," the magnification that is set through
Create Margin setting is recalled. See ⇒
P.98 "Create Margin setting."
PROGRAM
indica-
39