Erase Center/Border - Ricoh FT7950 Operating Instructions Manual

ERASE CENTER/BORDER

This function erases the center and/or all four
sides of the original image.
Erase Center
Erases the image at the center of the origi-
nal.
Erase Border
Erases the four sides of the original image.
Note
You can specify the wide of the border to
be erased within the range of 0 - 20 mm in
2.5 mm steps (0 - 0.8" in 0.1" steps.)
You can specify the width of the center im-
age to be erased within the range of 0 - 40
mm in 5 mm step(0 - 1.6" in 0.2" steps.)s.
The initial erasure width of the border is 5
mm(0.2".) You can change this initial value.
See ⇒ P.99 "Erase Border Width priority
setting."
The initial erasure width of the center is 10
mm(0.4".) You can change this initial value.
See ⇒ P.99 "Erase Center Width priority
setting."
You can specify the width of the top, bot-
tom, left, and right borders individually.
You can combine both the Erase Border
and Centering function.
ERASE CENTER/BORDER
1
Press the [Edit Image] key.
2
Press the [Cent./Bord.] key.
3
When changing the erasure width, se-
lect either Center or Border and set the
dimensions of the border width using the
[+] and [-] keys.
61