Copying; Basic Procedure - Ricoh FT7950 Operating Instructions Manual

BASIC PROCEDURE

1
Make sure that the message "Ready" is
present on the panel display.
2
When the machine is set for user code,
enter the user code (8 digits maximum)
with the {Number} keys and then press
the {#} key.
The machine gets ready for copy process-
ing.
Reference
See ⇒ P.100 "Set User Code(s)."
3
Make sure that there are no previous set-
tings remaining.
Note
To clear settings, press the {Clear Modes/
Energy Saver} key and re-enter.
4
Set your originals.
Reference
See ⇒ P. 21 "SETTING ORIGINALS."
5
Set your desired settings.
Reference
See the individual functional descriptions.

2. COPYING

6
Enter the number of copies required
with the {Number} keys.
Note
The maximum copy quantity can be set be-
tween 1 and 999.
You can change the maximum copy quan-
tity. See ⇒ P.101 "Maximum copy input
number."
To change the number entered, press the
{Clear/Stop} key and re-enter.
7
Press the {Start} key.
The machine starts copying.
Note
To stop copying, press the {Clear/Stop}
key.
To return the machine to the initial condi-
tion after copying, press the {Clear Modes/
Energy Saver} key.
You can suppress the generation of beep
which would otherwise be heard whenever
you press a key. See ⇒ P.96 "Panel beeper."
You can make the beeper sound short beeps
when a copy job has been completed. See
⇒ P.96 "Job End Call."
You can have animations to be displayed
when you press the main switch or during
copy processing. See ⇒ P.96 "Touch Panel
in Waiting Mode."
19