Table of Contents
Advertisement
Staple
This function staples each copy of sheets.
There are two staple modes: the auto staple
mode in which each copy is stapled automati-
cally at the end of copy processing and the
manual staple mode in which sheets are stapled
on each press of a key.
Limitation
For stacking, the following limitations ap-
ply:
Paper size
Metric version: A3
L
Inch version: 11" × 17"
The number of originals that can be stapled
is 2 to 50 sheets. The auto staple mode is
disabled when the upper limit value is ex-
ceeded.
Set the originals in the document feeder.
When setting originals on the exposure
glass or copying in Special Original func-
tion (Pasted Original) or SADF mode, do
not specify the staple function before start-
ing copy processing but select the manual
staple mode later.
Note
The Sort function is automatically selected
when you select the Staple function.
You can selected one of two stapling posi-
tions by changing the position of the sta-
pler in the Sorter Stapler hanging-on type.
See ⇒ P.89
, ~ B5
KL
" × 11"
1 / 2
~ 8
L
K
SORT/STACK/STAPLE
You can change the 2 staples mode to 3
staples mode on the Sorter Stapler Con-
sole type . See ⇒ P.102 "Staple Selec-
tion"
Reference
If you want to add stapes, see ⇒ P.88 "IF
STAPLES RUN OUT."
If a staple is jammed, see ⇒ P.90 "IF A
STAPLE IS JAMMED."
Original Orientations and Sta-
pling Positions
Note
You cannot change the stapling position
during copy processing.
33
Advertisement
Table of Contents
