Settings You Can Change With The User Tools; Set Operation Modes; Screen Saver; Default Setting - Ricoh FT7950 Operating Instructions Manual

USER TOOLS

SETTINGS YOU CAN CHANGE WITH THE USER TOOLS

Reference
For how to access the user tools, see ⇒ P.93 "CHANGING THE USER TOOLS SETTINGS."

1 Set operation modes

menu

Screen Saver

Default Setting

Touch Panel in Waiting
Mode

Panel beeper

Job End Call

96
The machine turns off the panel display when you take no action for a
certain period after copy processing is done. Display Auto Off specifies
this period. You can adjust this time from 1 seconds to999.
Note
Default: 60sec.
Specifies whether the setting assigned to program No. 10 is to be dis-
played on the user tools display.
Program 10 is assigned [1 Sided→2 Sided.]
To change the setting assigned to Program 10, follow the procedure given
in "Storing Programs." See ⇒ P.38.
Note
Default: Program 10
Specifies whether the animation is to be displayed when the main power
switch is turned on or when the machine is copying. You can confirm the
time till the machine gets ready for copying and the time till copying is
finished.
Note
Default: OFF.
Specifies whether a short beep is to be generated each time a key is pressed.
Note
Default: ON.
Specifies whether three short beeps are to be generated at the end of copy
processing.
Note
Default: OFF.
Description