WHAT TO DO IF SOMETHING GOES WRONG
When the left half part of the
paper tray can be pulled out
(copy mode)
Important
Do not stack paper over the limit mark.
Make sure that the paper is aligned at the
left.
Note
Take out any curls or correct any warpage
of the paper before setting.
3
Return the paper tray into the original
position.
76
Replenishing Paper in Tray 2
1
Pull out the specified paper tray until it
stops.
2
Square the paper and set it in the tray.
Important
Do not stack paper over the limit mark.
Make sure that the paper is aligned at the
right.
Note
Take out any curls or correct any warpage
of the paper before setting.
3
Return the paper tray into the original
position.
PG6A1201
PG6A1301