E-4: Paper Jams In Tray 2 - Xerox WorkCentre 5019 User Manual

2. If the jammed paper cannot be removed, pull out the tray.
Note Pulling out a tray after a paper jam without checking where the jam is located may cause
the paper to tear and leave shreds inside the machine. To prevent equipment failure, check the
location of paper jams on the display before attempting to clear them.
3. Remove the jammed paper.
If the tray is empty, load paper.
Note If the paper tears, check to make sure there are no remaining shreds in the machine.
4. Push the tray in gently until it stops.

E-4: Paper jams in Tray 2

Follow the steps below to clear paper jams in Tray 2.
1. Remove the jammed paper by referring to
32.
WorkCentre 5019/5021
User Guide
E-2: Paper jam in one tray module cover B
Problem solving
on page 11-
11-33