Xerox WorkCentre 5019 User Manual page 38

Product overview
No. Component
20 Lighten/Darken button
21 Original Type button
22 Collated button
23 Pages per Side button
Note Some buttons are not available on some models. If you add certain options, you will be able
to use them. For more information, contact our Customer Support Center.
3-12
Description
Press this button to select a copy density level or toner saver mode.
The selection moves to the right on the machine status diagram every time
the button is pressed.
When the button is pressed while the rightmost icon (toner saver mode) is
lit, the selection moves back to the leftmost icon.
For more information, refer to
Press this button to select a document type of the document.
The selection moves to the right every time the button is pressed.
For more information, refer to
Press this button to set collate when copying multiple copies.
The selection switches between sorting and stacking every time the button
is pressed.
When documents are set in the document feeder, this feature is
automatically enabled.
For more information, refer to
Press this button to use the Pages per Side feature.
Normally, the light is off (Off). The selection moves to the right from Off
(disabled) → 2-up → 4-up every time the button is pressed. When the
button is pressed while 4-up is lit, the light goes off again.
When 2-up or 4-up is selected, the scanning size and orientation that
matches the paper size are displayed on the original size display area of the
machine status diagram.
For more information, refer to
Lighten/Darken on page 5-15.
Original type on page 5-14.
Collate on page 5-11.
Pages per side on page 5-19.
WorkCentre 5019/5021
User Guide