2-Sided - Xerox WorkCentre 5019 User Manual

Copy
5. Place the other side of the ID card face down slightly away from the top left corner of the
document glass, and close the document cover.
6. Press the Start button.

2-sided

You can set the machine to scan a 1-sided or 2-sided document, or copy to one or both sides of the
paper.
Note This feature is available when the duplex output unit is installed on the machine.
1. Press the 2 Sided button to select the desired copy method.
2 Sided button
→
1 1 Sided
1→ 2 Sided
2→2 Sided
2→1 Sided
To copy 1 → 2 Sided or 2 → 1 Sided for short edge binding, change the binding edge setting and place
the document in landscape orientation. It is not copied properly for short edge binding when either the
document or the paper is set for portrait orientation or is using the "Pages per Side" feature.
5-18
Copies a 1-sided document to one side of the paper. The copy
appears the same as the original.
Copies a 1-sided document to both sides of the paper for long
edge binding.
Copies a 2-sided document to both sides of the paper. The copy
appears the same as the original.
Copies a 2-sided document to one side of the paper. The 2-sided
document is scanned as the document for long edge binding and
each original page is copied to only one side of each sheet of
paper.
WorkCentre 5019/5021
User Guide