Hold; Putting A Call On Hold - Siemens ROLMphone 120 Series User Manual

Hold

Putting a Call on Hold

The Hold key lets you temporarily hang up a line without
disconnecting the other party. If you do not retrieve the call after a
certain period of time (determined by the communications server),
your phone will ring. If it is an external call and you do not answer, the
call is transferred to the operator.
If you want to make another call after placing a call on hold, you must
use another line. If your telephone has only one line, use the
consultation feature to place another call. (See "Consultation" on page
3–12.)
Note: On Version 6.3 and higher, you can put conference calls and
consultation calls on hold.
To put a call on
hold
To reconnect to
the call
2-14 ROLMphone 120/240/400 Series User Guide
Press the Hold key.
If you were using the handset, you can
hang up.
The status light beside the line key flashes
to remind you that the call is on hold, and
the communications server will call you
back after a certain period of time. You can
put only one call on hold per line.
Press the line key next to the flashing status
light, or pick up the handset and press the
line key.