Siemens ROLMphone 120 Series User Manual page 94

Note: You can also assign a dialing sequence to a repdial key. (See
"Repertory Dialing (Repdial)" on page 3-24.)
To dial using a
station speed
code
To clear a station
speed code on a
display phone
3-36 ROLMphone 120/240/400 Series User Guide
Enter the station speed code you want to set
up (0 through 9, or 00 through 29 if you are
set up for more than 10 codes).
You will hear the confirmation tone.
Enter the dialing sequence you want to
assign to the code.
Hang up.
Press the Station Speed (SPEED) key.
You will hear the confirmation tone,
followed by the dial tone.
Dial the station speed code.
OR
Get a dial tone.
Dial # 3.
Dial the station speed code.
Press the Program key. The Program status
light turns on. PRESS FEATURE KEY OR
DIAL CODE is displayed.
Press the Station Speed (SPEED) key you
want to clear, or dial # # 3. SPEED DIAL
is displayed.