Base Settings; Changing The Base Ringtones; Activating/Deactivating Music On Hold; Protecting Against Unauthorized Access - Siemens Gigaset C590 User Manual

Base settings

The base settings are performed using a reg-
istered Gigaset C59H handset.

Changing the base ringtones

u
Volume:
You can choose between five levels of
volumes (1–5; e.g. level 3 = Š) and
the "crescendo" ringtone (6; where the
volume increases with each ring =
‡).
u
Ringtones:
You can select a ringtone from a list of
pre-loaded ringtones.
In idle state:
¢
v
Audio Settings
¢
Ringtones (Base)
¤
Change multiple line input:
r
Set volume.
s
Scroll to the next line.
r
Set melody.
§Save§
Press the display key to save the
setting.
•
Activating/deactivating
music on hold
¢
v
Audio Settings
¢
Music on Hold
§Change§
Press to activate or deactivate the
music on hold (³ = on).
•
Protecting against
unauthorized access
Protect the system settings of the base with
a PIN known only to yourself. You must enter
the system PIN when, for example, you regis-
ter/deregister a handset to/from the base or
when you restore the default settings.
Changing the system PIN
You can change the 4-digit system PIN set on
the base (the default is: 0000) to a 4-digit PIN
known only by you.
Gigaset C595 only: Setting a system PIN facil-
itates remote operation of the answering
¢
machine page 39.
Ï
¢ ¢
v
System
~
Enter the current system PIN
and press
~
Enter your new system PIN and
§OK§
press
Resetting the system PIN
If you have forgotten your system PIN you
can reset the base to the original code 0000:
u
Disconnect the power cord from the
base.
u
Hold down the registration/paging but-
ton on the base while reconnecting the
power cable to the base.
u
Keep the key pressed for at least 5
seconds.
The base has now been reset and the system
PIN 0000 set.
Please note
All handsets are deregistered and must
be re-registered. All settings are restored
to the factory settings.
•
Restoring the base to the
factory settings
When the settings are restored:
u
Date and time are retained
u
Handsets are still registered.
u
Eco Mode is switched on.
u
The system PIN is not reset.
Ï
¢ ¢
v
System
~
At the prompt, enter the system
PIN and press
§Yes§
Press the display key.
Base settings
¢
System PIN
§OK§
.
.
¢
Base Reset
§OK§
.
51