Displaying The Caller's Phone Number (Clip/Cli); Putting On Hold - Siemens Gigaset A 200 Manual

Making calls

Displaying the caller's phone number (CLIP/CLI)

The phone number of the caller is shown in the display during a call.
Requirements:
1. You have asked your network operator to enable the caller's phone number to be
shown in your display (CLIP).
2. The caller has asked the network operator to pass on his/her phone number (CLI).
Passing on a phone number may incur costs. For more information please
i
contact your network operator.
If you have stored an entry for a phone number in your handset directory (see page 24),
the name in the directory will appear instead of the phone number, e.g. "Tom".
023031230
If you do not have CLIP, "<< >>" will appear instead of the phone number.
If the caller does not have CLI or has withheld his/her phone number, "WITHHELD" will
appear in the display.
CLIP Calling Line Identification Presentation = the caller's phone number is
displayed
CLI Calling Line Identification = your own phone number is passed on during
external calls.

Putting on hold

During external calls you can put the incoming call on hold, so that, you can talk dis-
crectly to another person in the room for example. During this time the caller on the
phone cannot hear you (music on hold). Nor can you hear the caller.
[_______]
INT
[_______________]
MENU
[______________________________________________] [__________]
GO BACK
16
V
Phone number
or name
MENU
Press (INT ). The conversation takes place (music on
hold).
Ending call hold:
Press display key to open menu.
Confirm.
OK