Forced Authorization - Siemens ROLMphone 120 Series User Manual

Forced Authorization

With the Forced Authorization feature, the system will prompt you to
enter a personal identification number (PIN) to temporarily authorize
you to call an outside number from a phone with limited calling
capabilities. Forced Authorization remains in effect only until you
hang up. When you make another external call, the system will prompt
you for your PIN again.
Whether you are required (forced) to enter your PIN to make an
external call depends on the class of service of the phone you are using,
the number you have dialed, and the route the communications server
uses to connect you with a trunk (outside line).
To call an outside
number when a
PIN is
required
Note: You can also dial your PIN before you dial 9 and the outside
number. It will then stay in effect as you dial outside numbers,
until you deactivate it.
The steps required to do this are the same as those described
for activating and deactivating your PIN in "Remote
Authorization" on page 7-15.
7-14 ROLMphone 120/240/400 Series User Guide
Get a dial tone.
Dial 9 and the outside number.
You will hear the confirmation tone,
followed by the external dial tone.
Dial your PIN.
You will hear the confirmation tone.