Siemens ROLMphone 120 Series User Manual page 86

Note: You can also assign a frequently used number to a repdial key.
(See "Repertory Dialing (Repdial)" on page 3-24.)
3-28 ROLMphone 120/240/400 Series User Guide
Press the Saved Number Redial (SAV/
RDL) key, or dial # 4. If you have a display
phone, SAVED NUMBER REDIAL is
displayed followed by either the saved
number or NOTHING STORED. NEW
NUMBER? is then displayed.
Enter the number you want to save. If you
make an error while entering the number,
press the Clear key to cancel your changes
and then enter the number again.
Press the Program key. The Program status
light turns off. If you have a display phone,
STORED is displayed.