Siemens ROLMphone 120 Series User Manual page 130

To assign a call to
an account dur-
ing the call
7-2 ROLMphone 120/240/400 Series User Guide
Press the Account key. If you have a
display phone, ENTER ACCOUNT
CODE is displayed. (If a default account
number has been set up for you at the
communications server, ACCT CODE is
displayed, followed by your default
account number. If you want to charge the
call to your default account, you will not
need to dial an account number.)
Dial the account number.
OR
Ask the other party to hold.
Press the Transfer (TRANSFR) key.
You will hear the confirmation tone,
followed by the dial tone.
Dial * 2.
You will hear the confirmation tone,
followed by the dial tone. If you have a
display phone, ENTER ACCOUNT
CODE is displayed. (If a default account
number has been set up for you at the
communications server, ACCT CODE is
displayed, followed by your default
account number. If you want to charge the
call to your default account, you will not
need to dial an account number.)
Dial the account number.
You will hear the confirmation tone. If you
have a display phone, STORED is
displayed.
Press the Connect key to return to the other
party.