Trunk Standby Queuing - Siemens ROLMphone 120 Series User Manual

To cancel trunk
callback queuing
from a display
phone
To cancel trunk
callback queuing
from a non-dis-
play phone

Trunk Standby Queuing

With Trunk Standby Queuing, you can stay on a line until a trunk
becomes free. As soon as the trunk becomes free, your call will be put
through automatically.
To standby queue
for a trunk
Note: If you hear a long (30 sec.) queuing tone, your class of service
only has Trunk Callback Queuing and you cannot use Trunk
Standby Queuing. Hang up and Trunk Callback Queuing will
be initiated. See "Trunk Callback Queuing" on page 3-39.
To cancel trunk
standby queuing
3-40 ROLMphone 120/240/400 Series User Guide
Press the Callback (CALLBCK) key until
the auto-callback request you wish to
cancel is displayed. The status light next to
the Program key turns on, indicating that
your phone is in program mode.
Press the Clear key. DELETED is
displayed to confirm the cancellation.
Press the Program key to end the display.
Get a dial tone.
Dial # # 1.
You will hear the confirmation tone.
Hang up.
After dialing an outside number, stay on
the line.
You may hear a queuing tone. When a
trunk becomes free, the communications
server will complete your call.
Hang up.