Siemens ROLMphone 120 Series User Manual page 95

Note: You cannot clear a station speed key on a non-display phone
or any phone without a Clear key, though you can set it up to
dial a different sequence.
Enter the station speed code you want to
clear (0 through 9, or 00 through 29 if you
are set up for more than 10 codes). The
dialing sequence is displayed. (You can
view the contents of other codes by
entering their codes now.)
Before NEW NUMBER? is displayed,
press the Clear key. DELETED is
displayed.
If you want to clear another station speed
code, press the Store key. STORED is
displayed. Repeat the three previous steps.
To end setup, press the Program key. The
Program status light turns off. STORED is
displayed.
Making Calls 3-37