ICS Master Module
ICS Master Module
Removal
1. Raise the seat to its highest position. To raise
it manually, see page 28,31.
2. Put the circuit breaker in the "OFF" position;
see page 35.
3. Remove the rear chassis cover; see page 7.
4. Lift the ICS Master Module straight up from its
holder; see figure.
5. Remove the lid from the ICS Master Module.
6. Clip the cable ties that hold the cables and its
electrical connections, being attentive to their
placement to facilitate subsequent refitting.
Fitting
Fitting is the reverse procedure.
ICS Master Module unattached in its holder.
ICS Master Module.
34