Permobil Street Service Manual page 37

Circuit breaker and fuses
Circuit breaker replacement
1. Remove the chassis covers; see page 7.
2. Put the circuit breaker in the "OFF" position; see
figure.
3. Disconnect the minus cable from the front battery.
4. Disconnect the plus cable from the rear battery.
NOTE
Bend the battery connection cables off to the side to prevent
them from coming in contact with the battery terminals.
5. Remove the circuit breaker from its bracket. The
circuit breaker is removed by pressing the plastic
clip on one side of the circuit breaker outwards
using a screwdriver; see figure.
NOTE
Note the orientation of the circuit breaker with consideration to
subsequent mounting. The ON/OFF positions must agree with
the decal.
6. Disconnect the cables from the circuit breaker by
removing the screws; see figure.
7. Put the new circuit breaker in the "OFF" position.
8. Connect the cables to the new circuit breaker.
NOTE
Check that the cables are firmly attached.
9. Fit the new circuit breaker to the bracket.
NOTE
Note the orientation of the circuit breaker. The ON/OFF positions
must agree with the decal.
10. Reconnect the battery connection cables to
the batteries.
11. Refit the chassis covers; see page 7.
12. Put the circuit breaker in the "ON" position;
see figure.
Circuit breaker bracket.
Circuit breaker cable connection.
37
Circuit breaker and fuses