Permobil Street Service Manual page 25

Magnetic wheel lock
4. Insert a screw to align the parts. Attach the
rubber seal with the drainage hole down.
Be attentive to the position of the wheel lock
release lever; fit the wheel lock so that the
wheel lock release lever is aligned with the
motor's cable bracket. Now fit the magnetic
wheel lock using the three screws.
5. Connect the magnetic wheel lock's electrical
connection; see figure.
6. Fit the wheel lock release cable; see figure.
7. Fit the covers; see page 7.
Align the parts with one another
using one of the attachment screws.
Fit the rubber seal.
Magnetic wheel lock
electrical connection.
Fit the wheel lock release cable.
25
Magnetic wheel lock