Ics Master Module - Permobil K Service Manual

ICS master module

(Only applies to chassis with R-net.)
The wheelchair seat may be equipped with an ICS
control system, and if so, the seat is controlled
from the system's ICS master module. This is
fitted in the wheelchair chassis.
Removal
1. Raise the seat to the highest position. If
the electric seat lift does not work normally
because the batteries are discharged or the
adjustment device is defective, the seat can be
raised/lowered manually. See page 26.
2. Switch off the main power switch on the
control panel.
3. Remove the chassis covers. See page 8-9.
4. Lift the master module upright of its holder
(see fig.).
5. Pull the cover off.
6. Cut off the cable ties that hold the cables and
detach the electrical connections. Note their
positions for subsequent fitting.
Assembly
Assemble in the reverse order.
ICS master module loose in its holder.
ICS master module with cover removed.
41 41
ICS Master Module