Support Wheels; Shock Absorbers - Permobil Street Service Manual

Support wheels & shock absorbers

Support wheels

Removal
1. Turn off the main power switch on the control
panel.
2. Remove the bolt; see figure.
Fitting
Fitting is the reverse procedure.
WARNING
Removal of the support wheels entails increased risk for
tipping. The wheelchair may not be operated if the support
wheels are not attached.

Shock absorbers

Removal, front
1. Turn off the main power switch on the control
panel.
2. Support the chair on blocks so that the
appropriate wheel is off the ground.
3. Unscrew the two bolts that secure the shock
absorber; see figure.
Fitting
Fitting is the reverse procedure. Adjust the shock
absorber spring before fitting, see page 15.
Removal, back
1. Raise the seat to its highest position. To raise
it manually, see page 28, 31.
2. Turn off the main power switch on the control
panel.
3. Remove the chassis covers; see page 7.
4. Lift the wheelchair chassis and support it on
blocks so that the wheel is off the ground.
5. Unscrew the two bolts that secure the shock
absorber; see figure.
Fitting
Fitting is the reverse procedure. Adjust the shock
absorber spring before fitting, see page 15.
The support wheels are fitted
with one bolt each.
Front shock absorber.
Rear shock absorber.
14