3Com 5000/6000 Quick Reference Manual page 99

3Com Router 5000/6000 Family
Command Reference
mobile-ip tunnel path-mtu-discovery
Use the
mobile-ip tunnel path-mtu-discovery
mobile-ip virtual-network
Use the
mobile-ip virtual-network
mobile-network
Use the
mobile-network
mobile-network
Use the
mobile-network
mobile-node
Use the
mobile-node
registration lifetime.
mode
Use the
mode
mode (SIP Client view)
Use the
mode
modem
Use the
modem
Use the
modem [ call-in | call-out ]
through.
modem adapt no-waiting-connect
Use the
modem adapt no-waiting-connect
switch from IDLE to ACTIVE without waiting for receiving the signal CONNECT (a signal used for a physical
modem to negotiation rate) after it receives CD_UP (a lower layer detects carrier signal).
modem auto-answer
Use the
modem auto-answer
interface automatically answer or hook off.
modem auto-answer
Use the
modem auto-answer
modem compatible-param
Use the
modem compatible-param
interoperate with devices from other vendors.
modem protocol
Use the
modem protocol none
Use the
modem protocol pcm
including coding/decoding and Modem negotiation mode.
modem timer answer
Use the
modem timer answer
off-hook action when setting up an incoming call connection.
monitor-port
Use the
monitor-port
more
Use the
more
command to define a virtual network.
command to configure a mobile network for an MR.
command to configure a mobile network for the MR.
command to set MN attributes, including the interface or virtual network and the
command to configure the R2 signaling mode in a country or region.
command to set the registration mode of the gateway.
or command to allow modem calls to pass through, both incoming and outgoing.
modem both
command to allow incoming or outgoing modem calls to pass
command to have the external modem connected to the asynchronous
command to set the answering mode to auto-answer.
command in the case that you fail to use standard Modem PCM to
protocol to disable Modem function for single voice entity.
command to configure PCM Modem protocol type for single voice entity,
command to set the timeout time spent waiting for the carrier signal after the
command to specify the current port as the monitoring port
command, you can view the contents of the specified file.
command to set the PMTU update policy.
command to set the asynchronous serial interface Modem to
99
System view
System view
HA-MR view
MR view
System view
R2 CAS view
SIP Client view
User Interface view
User Interface view
User Interface view
User Interface view
Voice Entity view
Voice Entity view
User Interface view.
Ethernet Interface view
User view