3Com 5000/6000 Quick Reference Manual page 125

3Com Router 5000/6000 Family
Command Reference
reset dlsw bridge-entry
Use the
reset dlsw bridge-entry
group.
reset dlsw circuits
Use the
reset dlsw circuits
reset dlsw ethernet-backup circuit
Use the
reset dlsw ethernet-backup circuit
router and its neighbors have established with the remote peers since DLSw Ethernet redundancy is
enabled.
reset dlsw ethernet-backup map
Use the
reset dlsw ethernet-backup map
support feature.
reset dlsw reachable-cache
Use the
reset dlsw reachable-cache
DLSw.
reset dlsw tcp
Use the
reset dlsw tcp
Use the
reset dlsw tcp
to the specified remote peer.
reset dns dynamic-host
Use the
reset dns dynamic-host
DNS client.
reset dvpn all
Use the
reset dvpn all
to initiate the DVPN domain.
reset dvpn map
Use the
reset dvpn map
reset dvpn session
Use the
reset dvpn session
reset dvpn statistics
Use the
reset dvpn statistics
reset encrypt-card sa
Use the
reset
reset encrypt-card statistics
Use the
reset encrypt-card statistics
encryption card.
reset encrypt-card syslog
Use the
reset encrypt-card syslog
reset esis statistics
Use the
reset esis statistics
reset fcm
Use the
reset fcm
counter for each FCM interface.
command to clear the entry cache information in the DLSw bridge
command to clear the DLSw virtual circuit information.
command to clear the MAC address map of the Ethernet switch
command to clear information from the reachable-cache of the
command to reestablish or delete all connection to all the remote peers.
ip-address command to reestablish a TCP connection or delete the connection
command to clear the current contents in the domain name cache of the
command to clear all operating information about a specified DVPN domain and
command to clear a specified map.
command to clear a specified session.
command to clear all the statistics information of a DVPN module.
command to clear the SAs on the encryption card.
encrypt-card sa
command to clear the statistics during processing of the
command to clear all the logging information on the encryption card.
command to reset statistics information about ES-IS flow.
command to clear the dial-up negotiation failure counter and the timeout disconnection
command to clear information about all circuits that the
125
User view
User view
User view
User view
User view
User view
User view
User view
User view
User view
User view
User view
User view
User view
User view
User view