3Com 5000/6000 Quick Reference Manual page 21

3Com Router 5000/6000 Family
Command Reference
debugging esis
Use the
debugging esis event
display event information using this command, such as changes of neighbor states, entries in Level 0
routing table, and interface states.
Use the
debugging esis packet
about received/transmitted ES-IS packets, such as packet size, packet type, packet HT, and Layer 2 and
Layer 3 address.
debugging firewall
Use the
debugging firewall
debugging fr
Use the
debugging fr
debugging fr compress
Use the
debugging fr compress
debugging fr compression
Use the
debugging fr compression iphc
debugging fr pvc-group
Use the
debugging fr pvc-group
groups.
debugging hdlc clns
Use the
debugging hdlc clns
debugging hwatacs
Use the
debugging hwtacacs
debugging hwping
Use the
debugging hwping
debugging igmp
Use the
debugging igmp
debugging ike
Use the
debugging ike
debugging ike dpd
Use the
debugging ike dpd
debugging ip
Use the
debugging ip icmp
debugging ip count
Use the
debugging ip count
Accounting).
debugging ip multicast-policy
Use the
debugging ip multicast-policy
debugging ip netstream
Use the
debugging ip netstream
debugging ip urpf
Use the
debugging ip urpf
command to enable debugging for ES-IS protocol-related events. You can
command to enable debugging for ES-IS packets. You display information
command to enable the information debugging of the firewall packet filtering.
command to enable frame relay information debugging.
command to enable FRF9 IPHC debugging of frame relay.
command to enable FRF20 IPHC debugging of frame relay.
command to enable debugging for the specified PVC group or all PVC
command to enable debugging for HDLC OSI packets.
command to enable TACACS+ debugging.
command to enable HWPing debugging.
command to enable IGMP debugging functions.
command to enable IKE debugging.
command to enable IKE DPD debugging.
command to enable the ICMP debugging.
command to enable debugging for the IP Accounting module (the IP
command to enable the debugging of IP multicast policy routing.
command to enable NetStream debugging.
command to display the information on the rejected packets by URPF.
21
User view
User view
User view
User view
User view
User view
User view
User view
User view
User view
User view
User view
User view
User view
User view
User view
User view