3Com 5000/6000 Quick Reference Manual page 150

150
timer realtime-accounting
tUse the
timer realtime-accounting
timer realtime-accounting
Use the
timer realtime-accounting
timer register-complete (R2)
Use the
timer register-complete
signaling.
timer register-pulse (R2)
Use the
timer pulse
(A3, A4 and A6, etc.).
timer response-timeout
Use the
timer response-timeout
timer response-timeout
Use the
timer response-timeout
timer retry
Use the
timer retry
timer ring (R2)
Use the
timer ring
is sent.
timer ring-back
Use the
timer ring-back
tone.
timer spf
Use the
timer spf
timer wait
Use the
timer wait
timer wait-digit
Use the
timer wait-digit
digit.
timers
Use the
timers
Garbage-collection, of RIP.
timeslot-set
Use the
timeslot-set
signaling configurations.
timestamp
Use the
timestamp
tos
Use the
tos
trace interval
Use the
trace interval
process, that is, the number of voice packets upon the pass of which a record will be made.
command to configure a real-time accounting interval.
command to configure a real-time accounting interval.
command to configure the timeout value for register signals of R2
command to configure the persistence time of the register pulse signal of R2 signaling
command to configure the RADIUS server response timer.
command to set the response timeout timer of the TACACS server.
command to configure the value of connection request re-try period.
command to configure the maximum time range before the signal tone of R2 signaling
command to configure the maximum duration for the system to send the ringback
command to configure the interval for the SPF calculation.
command to set a timeout period for a probing attempt.
command to configure the maximum time duration that the system waits for a
command to modify value for the three timers, Period update, Timeout and
command to configure the timeslot set to perform R2 signaling and digital E&M
command to enable the local end to send voice packets with timestamps.
command to assign a value to the ToS field in the header of HWPing test packets.
command to configure the interval for information recording in the debugging
3Com Router 5000/6000 Family
Command Reference
RADIUS view
TACACS+ view
R2 CAS view
R2 CAS view
RADIUS view
TACACS+ view
MSDP view
R2 CAS view
Voice Subscriber-Line view
IS-IS view
Detect Group view
Voice Subscriber-Line view
RIP view
CE1/PRI Interface view
Voice Entity view
HWPing Test Group view
Voice view