12
ca identifier
Use the
ca identifier
this device.
cable
Use the
cable
cable
Use the
cable
cable
Use the
cable
router and the cable distribution frame.
cable (CT1/PRI Interface)
Use the
cable
of the transmission line.
cable (CT3 Interface)
Use the
cable
cache-sa-enable
Use the
cache-sa-enable
call-mode
Use the
call-mode
callednumber receive-method
Use the
callednumber receive-method
digits of the called number are collected or after a pound sign (#), the terminator, is received.
caller-permit
Use the
caller-permi
car
Use the
car
card-digit
Use the
card-digit
number.
cas
Use the
cas
cbs
Use the
cbs
ccc interface out-interface
Use the
ccc interface out-interface
ccc interface transmit-lsp receive-lsp
Use the
ccc interface transmit-lsp receive-lsp
cd
Use the
cd
argument, the current path is displayed.
command to specify the CA this device trusts and have the "name" CA bound with
command to set the cable length matching the CE1/PRI interface.
command to set the cable length of the ATM E1 interface.
command to configure the cable mode of ATM T3 cable, i.e., to set the distance between the
command to set cable attenuation and length on a CT1/PRI interface to match the distance
command to configure the length of the cable with which a CT3 interface is connected.
command to enable the router to cache SA state.
command to configure a call-mode for calls between local router and peer router.
command to enable the device to place a call immediately after all
t command to configure the calling numbers that are permitted to call in.
command to configure traffic monitoring for a behavior.
command to configure the number of digits in a card number for an access service
command to enter the R2 CAS view and digital E&M Signaling view.
command to set the committed burst size of frame relay virtual circuit.
command to create a local CCC connection.
command to change the current path on the SFTP server. If you do not specify the remote-path
command to create a remote CCC connection.
3Com Router 5000/6000 Family
Command Reference
PKI Domain view
CE1/PRI Interface view
ATM E1/T1 Interface view
ATM T3 Interface view
CT1/PRI Interface view
CT3 Interface view
MSDP view
Voice Entity view
Voice Access-Number view
Voice Entity view
Traffic Behavior view
Voice Access-Number view
CE1/PRI Interface view
Frame Relay Class view
System view
System view
SFTP Client view
Need help?
Do you have a question about the 5000/6000 and is the answer not in the manual?