30
destination-ip
Use the
destination-ip
destination-port
Use the
destination-port
detect
Use the
detect
detect
Use the
detect
detect-ais (CE1/PRI Interface)
Use the
detect-ais
detect group
Use the
detect-group
detect list
Use the
detect-list
sequence number.
dh
Use the
dh
dhcp accounting domain (Interface view)
Use the
dhcp server accounting domain
interface address pool and configure a domain for DHCP accounting.
dhcp enable
Use the
dhcp enable
dhcp relay information
Use the
dhcp relay information enable
globally.
dhcp relay information strategy
Use the
dhcp relay information strategy
option 82 on the DHCP relay.
dhcp relay release
Use the
dhcp relay release
DHCP relay.
dchp select (Interface view)
Use the
dhcp select
destined to the local device.
dchp select (System view)
Use the
dhcp select
range to dispose the DHCP packets destined to the local device.
dhcp server accounting domain interface (System view)
Use the
dhcp server accounting domain interface
from the address pools of the specified interfaces and configure a domain for DHCP accounting.
command to configure the destination IP address in the test.
command to configure the destination port in the test.
command to specify ASPF policy for application layer protocols.
command to enable data carrier detection as well as level detection on a serial interface.
command to enable alarm indication signal (AIS) detect on the CE1/PRI interface.
command to create a detect group and enter its view.
command to add an IP address to the detect group and assign the address a detecting
command to select the Diffie-Hellman group for an IKE proposal.
command to enable DHCP.
command to send an IP address releasing request to a DHCP server via the
command in Interface view to select a method for disposing the DHCP packets
command in System view to select a method for multiple interfaces in a specified
command to enable DHCP accounting for addresses from the
command to enable the DHCP relay to support option 82
command to configure a strategy for handling packets with
command to enable DHCP accounting for addresses
3Com Router 5000/6000 Family
Command Reference
HWPing Test Group view
HWPing Test Group view
ASPF Policy view
Asynchronous Serial Interface view
Synchronous Serial Interface view,
CE1/PRI Interface view
System view
Detect Group view
IKE Proposal view
Interface view
System view
System view
System view
Interface view
System view
Interface view
System view
System view
Need help?
Do you have a question about the 5000/6000 and is the answer not in the manual?