3Com 5000/6000 Quick Reference Manual page 80

80
igmp timer other-querier-present
Use the
igmp timer other-querier-present
IGMP querier.
igmp timer query
Use the
igmp timer query
messages.
igmp version
Use the
igmp version
ignore-lsp-checksum-error
Use the
ignore-lsp-checksum-error
LSP.
ike dpd
Use the
ike dpd
ike local-name
Use the
ike local-name
ike next-payload check disabled
Use the
ike next-payload check disabled
in the last payload of the IKE negotiation packet during IPSec negotiation for compatibility with other
vendors.
ike peer (IPSec Policy view or IPSec Policy Template view)
Use the
ike peer
ike peer (System view)
Use the
ike peer
ike proposal
Use the
ike proposal
ike sa keepalive-timer interval
Use the
ike sa keepalive-timer interval
packet to the remote end through ISAKMP SA.
ike sa keepalive-timer timeout
Use the
ike sa keepalive-timer timeout
Keepalive packet.
ike sa nat-keepalive-timer interval
Use the
ike sa nat-keepalive-timer interval
peers.
ima-clock
Use the
ima-clock
ima ima-group
Use the
ima ima-group
specified IMA group does not exist, it is created first.
ima-test
Use the
ima-test
of the IMA group.
command to configure the overtime value of presence of
command to configure the interval at which a router interface sends IGMP query
command to specify the version of IGMP that a router uses.
command to configure the IS-IS to ignore the checksum error of
command to create a DPD structure and enter its view.
command to set the name of the local GW.
command to disable the router to check the next-payload field
command to quote an IKE peer in an IPSec policy or IPSec policy template.
command to configure an IKE peer and access IKE-peer view.
command to define an IKE proposal.
command to configure the interval for sending Keepalive
command to configure a timeout for ISAKMP SA to wait for the
command to configure the clock mode of the IMA group.
command to add the ATM E1/T1 interface to the specified IMA group. If the
command to set a test pattern for testing the connectivity of the specified link to the rest
command to configure the NAT keepalive interval for IKE
3Com Router 5000/6000 Family
Command Reference
Interface view
Interface view
Interface view
IS-IS view
System view
System view
System view
IPSec Policy view
IPSec Policy Template view
System view
System view
System view
System view
System view
IMA Group Interface view
ATM E1/T1 Interface view
IMA Group Interface view