3Com 5000/6000 Quick Reference Manual page 77

3Com Router 5000/6000 Family
Command Reference
hwatacacs change-password self
Use the
hwtacacs change-password self
password.
hwatacacs nas-ip
Use the
hwtacacs nas-ip
hwatacacs scheme
Use the
hwtacacs scheme
scheme does not exist, you can create a new TACACS+ scheme.
hwping
Use the
hwping
hwping-agent enable
Use the
hwping-agent enable
hwping-agent max-requests
Use the
hwping-agent max-requests
hwping-server enable
Use the
hwping-server enable
hwping-server tcpconnect
Use the
hwping-server tcpconnect
hwping-server udpecho
Use the
hwping-server udpecho
icmp redirect send
Use the
icmp redirect send
id-type
Use the
id-type
idle-mark
Use the
idle-mark
idle-timeout
Use the
idle-timeout
disconnected.
idlecode (CE1/PRI Interface)
Use the
idlecode
are available: 0x7e and 0xff.
idlecode (CT1/PRI Interface)
Use the
idlecode
are available: 0x7e and 0xff.
if-match
Use the
if-match
if-match acl
Use the
if-match acl
if-match acl
Use the
if-match acl
command to enable the TACACS online user to change the
command to specify the source address of the hwtacacs packet sent from NAS.
command to enter TACACS+ Server view. If the specified TACACS+ server
command to create an HWPing test group.
command to enable the HWPing client function.
command to set the allowed maximum number of concurrent tests.
command to enable HWPing Server.
command to create a TCP listening service.
command to create a UDP listening service.
command to enable the sending of ICMP Redirect messages.
command to select the type of ID used in IKE negotiation.
command to set the line idle-mark of the synchronous serial interface to "FF".
command to set the idle-timeout timer. When it expires, the user connection is
command to set the line idle code on the CE1/PRI interface. Two types of line idle code
command to set the line idle code on the CT1/PRI interface. Two types of line idle code
command to define the match rule of a class.
command to define ACL match rule.
command to set conditions that multicast packets should meet in each policy node.
User view
System view
System view
System view
System view
System view
System view
System view
System view
System view
IKE-Peer view
Synchronous Serial Interface view
User Interface view
CE1/PRI Interface view
CT1/PRI Interface view
Class view
Class view
Route-Policy view
77