3Com 5000/6000 Quick Reference Manual page 5

3Com Router 5000/6000 Family
Command Reference
ani-offset
Use the
ani-offset
to requesting the calling party information.
answer
Use the
answer
apply access-vpn vpn-instance
Use the
apply access-vpn vpn-instance
in vpn-name1, vpn-name2, vpn-name3, vpn-name4, vpn-name5, vpn-name6 (if they all
exist) and forward packets after policy routing is enabled to satisfy route-policy.
apply as-path
Use the
apply as-path
route-policy.
apply community
Use the
apply community
apply cost
Use the
apply cost
apply cost-type
Use the
apply cost-type
apply default output-interface
Use the
apply default output-interface
apply ip-address
Use the
apply ip-address
apply ip-address default next-hop
Use the
apply ip-address default next-hop
apply ip-address next-hop (for Multicast Policy Routing)
Use the
apply ip-address
apply ip-address next-hop (for Unicast Policy Routing)
Use the
apply ip-address next-hop
apply ip-dscp
Use the
apply ip-dscp
apply ip-precedence
Use the
apply ip-precedence
apply isis
Use the
apply isis
or Level-1-2.
apply local-preference
Use the
apply local-preference
apply mpls-label
Use the
apply mpls-label
route-policy filter conditions.
command to configure the number of digits of the called number to be collected prior
command to configure whether the terminating point is required to send answer signal.
command to specify to search private network forwarding routes
command to specify the AS numbers to be added in front of the original AS path in
command to set BGP community attributes in route-policy.
command to set the route cost value of route information.
command to set the route cost type of route information.
command to set default forwarding interface for packets.
command to set the next hop address of route information.
command to configure the next hop IP address list in a route-node.
command to set the packet next hop.
command to configure to modify the packet DSCP value matching the policy.
command to set precedence of IP packets.
command to apply the level of a matched route to be redistributed to Level-1, Level-2
command to apply the local preference of route information.
command to assign MPLS labels for public network routes that match
command to set the default next hop of a packet.
5
R2 CAS view
R2 CAS view
Route-Policy view
Routing Policy view
Routing Policy view
Routing Policy view
Routing Policy view
Route-Policy view
Routing Policy view
Route-Policy view
Route-Policy view
Route-Policy view
Route-Policy view
Route-Policy view
Routing Policy view
Routing Policy view
Route-Policy view