3Com 5000/6000 Quick Reference Manual page 105

3Com Router 5000/6000 Family
Command Reference
number-match
Use the
number-match
number-substitute
Use the
number-substitute
oam ais-rdi
Use the
oam ais-rdi
argument is specified, the default value applies.
oam frequency
Use the
oam frequency
PVC status. You can also enable OAM F5 Loopback retransmission check or modify the related parameters
of the retransmission check.
oamping interface
Use the
oamping interface
specified PVC for checking link state. Receiving no response upon expiration of the specified time indicates
that the link is disconnected, busy, or prone to packet loss.
opaque-capability
Use the
opaque-capability enable
open
Use the
open
open-trunk
Use the
open-trunk
option
Use the
option
organization
Use the
organization
organizational-unit
Use the
organizational-unit
belongs.
originating-rp
Use the
originating-rp
address in the SA message originated.
osm connect slot
Use the
osm connect slot
the system on the OSM board. If you want to return from the OSM board to the operation interface on the
router, click hot key <Ctrl+k>.
osm reboot slot
Use the
osm reboot slot
osm reload slot
Use the
osm reload slot
osm shutdown slot
Use the
osm shutdown slot
equals to execute the turn off command on the operation system of OSM board.
command to configure a global number match-policy.
command to create a number-substitute list and enter voice dial program view.
command to change the parameters related to AIS/RDI alarm cell detection. If no
command to enable the transmission of OAM F5 Loopback cell so as to check the
command to enable the specified ATM interface to send OAM cells on the
command to enable the Opaque capability of OSPF.
command to set up control connection to the remote FTP server.
command to enable E&M non-signaling mode.
command to configure the self-defined options for a DHCP global address pool.
command to specify the name of the organization to which the entity belongs.
command to specify the name of the organization unit to which this entity
command to allow a MSDP to use the IP address of specified interface as the RP
command to connect the current control terminal to the OSM board to manage
command to reset the OSM board.
command to restart the operation system on OSM board.
command to shut down the operation system on OSM board. This operation
Voice Dial Program view
Voice Dial Program view
ATM Class view
ATM Class view
ATM Interface view
OSPF view
FTP Client view
Analog E&M Voice Subscriber Line view
DHCP Address Pool view
PKI Entity view
PKI Entity view
MSDP view
105
PVC view
PVC view
User view
User view
User view
User view