3Com 5000/6000 Quick Reference Manual page 8

8
authentication
Use the
authentication
number.
authentication
Use the
authentication
secondary TACACS+ authentication servers.
authentication-algorithm
Use the
authentication-algorithm
authentication-client method
Use the
authentication-client method
policy authenticates clients. None, CHAP, and PAP are currently available.
authentication-did
Use the
authentication-did
authentication-method
Use the
authentication-method
authentication-mode
Use the
authentication-mode
Use the
authentication-mode none
authentication at login.
authentication-mode
Use the
authentication-mode
attribute.
authentication-server method
Use the
authentication-server method
DVPN server it accesses.
authentication super hwtacacs-scheme
Use the
authentication super hwtacacs-scheme
a domain.
authorization
Use the
authorization
authorization
Use the
authorization
secondary TACACS+ authorization servers.
authorization-level
Use the
authorization-level
auto-config
Use the
auto-config
auto-config enable
Use the
auto-config enable
auto-execute command
Use the
auto-execute command
command to enable user authentication and authorization for the access service
command to set the IP address, port number and shared key for the primary and
command to select the authentication algorithm for an IKE proposal.
command to specify how the DVPN server that applies the DVPN
command to enable authentication for all one-stage dial (direct dial) users.
command to select the authentication method used by an IKE proposal.
command to set the authentication mode at login.
command to set the authentication mode to
command to configure one area of OSPF to support the authentication
command to specify a client whether or not to authenticates the
command to configure super authentication scheme for
command to configure an authorization scheme for the current ISP domain.
command to set the IP address, port number and shared key for the primary and
command to configure a local caller authorization level for the voice entity.
command to implement the
auto-config
command to enable
auto-config
command to set a command to be automatically executed.
3Com Router 5000/6000 Family
, that is, no
none
operation.
.
Command Reference
Voice Access-Number view
TACACS+ view
IKE Proposal view
Dvpn-Policy view
Voice AAA view
IKE Proposal view
User Interface view
OSPF Area view
Dvpn-Class view
ISP Domain view
ISP Domain view
TACACS+ view
Voice Entity view
System view
System view
User Interface view