Configuring Hotspot Service - Ruckus Wireless ZoneFlex 7781CM User Manual

Configuring Hotspot Service

Hotspot service can be deployed on standalone ZoneFlex APs through the Web
interface. At a minimum, you must configure a login redirect URL and a RADIUS
server to which users are authenticated. Additional options and controls are
provided on subsequent pages.
1 Go to Configuration > Hotspot.
Figure 43. Minimum configuration settings for providing Hotspot service
2 Click Enabled next to Hotspot Service.
3 Review the settings in
Table 34. Hotspot configuration settings
Setting
Redirect unauth. user to Redirect unauthenticated users to the specified URL (login
ZoneFlex Outdoor Access Point 9.8.1 User Guide, 800-70598-001 Rev B
Table 34, and make changes as needed.
Description
page).
Configuring Hotspot Service
Working with 802.1X on Wired Ethernet Ports
106