Zte ZXR10 8900 Series User Manual page 75

Parameter
< destination-
address >
traffic-eng
destination
< source
source-address
>
< ttl >
< reply-mode >
3. Configuring ping mpls Command
Command
ping mpls {ipv4 <destination
ZXR10#
-address>[destination <address-st
art><address-end><increment>][ttl
<ttl>]| pseudowire ipv4-address vc-id
<vc-id>[destination <address-start><a
ddress-end><increment>]| traffic-eng
<tunnel-interface><tunnel-number>[ttl
<ttl>]}[source <source-address>][rep
eat <count>][timeout <seconds>][{s
ize <datagram-size>}][reply mode
<reply-mode>][interval <msec>]
Parameters:
Parameter
< destination-
address >
traffic-eng
pseudowire
ipv4-address
vc-id < vc-id >
< datagram-
size >
interval < msec
>
reply mode
reply-mode
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 5 MPLS OAM Configuration
Description
FEC type: LDP IPv4 prefix
MPLS TE tunnel
This is destination address, dotted decimal
notation.
This is source address.
This sets TTL value, ranging from 1 to 255. The
default value is 30.
Response mode of reply packet: ipv4 or
reply-alert
Description
FEC type: LDP IPv4 prefix
MPLS TE tunnel
This is AToM VC type.
This is the size of Ping mpls packet, ranging
from 100 to 1500, 100 by default.
This is timeout time (in seconds), ranging from
1 to 60.
Response mode of reply packet: ipv4 or
reply-alert
Function
This checks LDP of
IPV4 and FEC of RSVP
in privileged mode.
67