Maintenance And Diagnosis Of Mpls Te Hot-Standby; Configuration Example Of Mpls Te Hot-Standby - Zte ZXR10 8900 Series User Manual

ZXR10 8900 Series User Manual (MPLS Volume)
70 Confidential and Proprietary Information of ZTE CORPORATION
Command
tunnel mpls
ZXR10(config-if)#
traffic-eng hot-standby [protect
<primary-path-option> secondary
<secondary-path-option>]
Parameter
<primary-path-opti
on>
<secondary-path-opt
ion>
Maintenance and Diagnosis
of MPLS TE HOT-STANDBY
ZXR10 8900 provides some commands to check working status of
hot-standby which are as follows:
Command
show mpls traffic-eng
ZXR10(config-if)#
tunnels [tunnel id]
debug ip rsvp
ZXR10(config-if)#
hot-standby
Configuration Example of
MPLS TE HOT-STANDBY
F 34 -
IGURE HOT STANDBY
Description
path-option of protected master lsp
path-option of hot-standby lsp
C E
ONFIGURATION XAMPLE
Function
This configures MPLS
TE HOT-STANGBY.
Function
This views the
detailed information
of hot-standby lsp.
This is the diagnosis
command of
hot-standby.