Configuring Ospf Between Ce And Pe; Figure 22 Configuring Rip Between Ce And Pe - Zte ZXR10 8900 Series User Manual

ZXR10 8900 Series User Manual (MPLS Volume)
F 22 C RIP CE PE
IGURE ONFIGURING BETWEEN AND
Configuration on CE1:
CE1(config)#router rip
CE1(config-router)#no auto-summary
CE1(config-router)#version 2
CE1(config-router)#network 10.1.0.0 0.0.0.3
CE1(config-router)#redistribute connected
Configuration on PE1:
PE1(config)#router rip
PE1(config-router)#version 2
PE1(config-router)#address-family ipv4 vrf vpn_a
PE1(config-router-af)#no auto-summary
PE1(config-router-af)#version 2
PE1(config-router-af)#network 10.1.0.0 0.0.0.3
PE1(config-router-af)#redistribute bgp-int
PE1(config-router-af)#exit
PE1(config-router)#exit
PE1(config)#router bgp 100
PE1(config-router)#address-family ipv4 vrf vpn_a
PE1(config-router-af)#redistribute rip
PE1(config-router-af)#redistribute connected
Configuring OSPF between CE and
PE
To configure OSPF between a CE and a PE, perform the following
steps.
40 Confidential and Proprietary Information of ZTE CORPORATION