Configuring Pvlan - Zte ZXR10 5900E Series User Manual

ZXR10 5900E Series User Manual (Ethernet Switching Volume)
St- Command
ep
1
ZXR10(config)#
solate <port-list>][promis <port-list>][community
<port-list>]
2
ZXR10(config)#
Example
10 Confidential and Proprietary Information of ZTE CORPORATION
Configuration of Switch A:
ZXR10_A(config)#vlan 10
ZXR10_A(config-vlan10)#switchport pvid gei_1/1-2
ZXR10_A(config-vlan10)#exit
ZXR10_A(config)#vlan 20
ZXR10_A(config-vlan20)#switchport pvid gei_1/4-5
ZXR10_A(config-vlan20)#exit
ZXR10_A(config)#interface gei_1/24
ZXR10_A(config--gei_1/24)#switchport mode trunk
ZXR10_A(config-gei_1/24)#switchport trunk vlan 10
ZXR10_A(config-gei_1/24)#switchport trunk vlan 20
ZXR10_A(config-gei_1/24)#exit
Configuration of Switch B:
ZXR10_B(config)#vlan 10
ZXR10_B(config-vlan10)#switchport pvid gei_1/1-2
ZXR10_B(config-vlan10)#exit
ZXR10_B(config)#vlan 20
ZXR10_B(config-vlan20)#switchport pvid gei_1/4-5
ZXR10_B(config-vlan20)#exit
ZXR10_B(config)#interface gei_1/24
ZXR10_B(config-gei_1/24)#switchport mode trunk
ZXR10_B(config-gei_1/24)#switchport trunk vlan 10
ZXR10_B(config-gei_1/24)#switchport trunk vlan 20
ZXR10_B(config-gei_1/24)#exit

Configuring PVLAN

vlan private-map session-id <id>[i
show vlan private-map
The configuration of two isolated groups is shown below.
Isolated group 1: gei_1/1,gei_1/2,xgei_2/1 and xgei_3/1 are iso-
lated ports, port gei_1/10 is a promiscuous port.
Isolated group 2: gei_1/3,gei_1/4 and gei_4/1 are isolated ports,
gei_1/5,gei_1/6 and gei_5/1 are community ports, gei_1/11 and
gei_1/12 are promiscuous ports.
The detailed configuration is as follows:
ZXR10(config)#vlan private-map session-id 1 isolate
gei_1/1-2,gei_2/1,gei_3/1 promis gei_1/10
ZXR10(config)#vlan private-map session-id 2 isolate
gei_1/3-4,gei_4/1 promis gei_1/11-12 community gei_1/5-6,gei_5/1
ZXR10(config)#show vlan private-map
Session Isolate_Ports Promis_Ports Community_ports
------------------------------------------------------------------
1 gei_1/1-2,gei_1/10
_2/1,gei_3/1
2 gei_1/3-4,gei_1/11-12
_4/1
ZXR10(config)#
Function
This configures isolated
ports, promiscuous ports and
community port of Private
VLAN.
This displays the configuration
information of PVLAN.
gei_1/5-6,gei_5/1
Vlan_Cfg Vlan