Ipfix Maintenance And Diagnosis - Zte ZXR10 5900E Series User Manual

ZXR10 5900E Series User Manual (Ethernet Switching Volume)
134 Confidential and Proprietary Information of ZTE CORPORATION
F 33 IPFIX C
IGURE ONFIGURATION
ZXR10_R1(config)#ip stream enable
ZXR10_R1(config)#interface gei_2/12
ZXR10_R1(config-if)#netflow-sample-rate ingress unicast 1024
ZXR10_R1(config-if)#netflow-sample-rate egress unicast 1024
ZXR10_R1(config)#ip strem export destination 192.168.1.1 2055
ZXR10_R1(config)#ip strem export destination 192.168.1.2 2055
ZXR10_R1(config)#ip stream export source 192.168.1.244
ZXR10_R1(config)#ip stream export version 9
ZXR10_R1(config)#ip stream topn 10 sort-by packets
ZXR10_R1(config)#ip stream template test
ZXR10_R1(config-stream-tempalte)#match src-ip
ZXR10_R1(config-stream-tempalte)#match dst-ip
ZXR10_R1(config-stream-tempalte)#match src-port
ZXR10_R1(config-stream-tempalte)#match dst-port
ZXR10_R1(config-stream-tempalte)#exit
ZXR10_R1(config)#ip stream run template test
IPFIX Maintenance and
Diagnosis
For the convenience of IPFIX maintenance and diagnosis, IPFIX
provides related view commands.
1. To show IPFIX-related configurations, execute the following
command:
show ip stream-config
This includes whether to enable IPFIX module, size of mem-
ory entries, server address, port configuration, source address
configuration, template refresh rate and refresh time configu-
ration.
2. To show TOPN, execute the following command:
show ip stream-topn
This shows information of N data flows according to set TOPN
display mode.
egress, source address, destination address, source port,
destination port, L3 protocol type, the number of packets or
the number of bytes (corresponding to TOPNS setting).
E
XAMPLE
The information includes data flow ingress,