Configuring Cfm; Basic Configuration Of Cfm - Zte ZXR10 5900E Series User Manual

St-
Command
ep
1
cfm {enable|disable}
ZXR10(config)#
2
cfm create md session <1-16> name
ZXR10(config)#
<mdname> level <0-7>
3
cfm delete md <1-16>
ZXR10(config)#
4
cfm md session <1-16>
ZXR10(config)#
5
ZXR10(config-md)#
<maname>
6
ZXR10(config-md)#
7
ZXR10(config-md)#
8
ZXR10(config-md-ma)#
9
ZXR10(config-md-ma)#
10
ZXR10(config-md-ma)#

Configuring CFM

Basic Configuration of CFM

ma create session <1-32> name
ma delete {<1-32>|<maname>}
ma session <1-32>
protect {vlan|link}
primary vlan <1-4094>
speed {slow|fast}
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 14 Ethernet OAM Configuration
Function
This enables CFM at global
configuration mode.
Enable: enable CFM
Disable: disable CFM
This establishes and
configures MD attribute.
When establishing
successfully, enter into
MD mode automatically.
This deletes MD.
This enters into MD
configuration mode.
This creates MA.
Enter into CFM MA mode
successfully.
This deletes MA.
< 1-32 > : session id of MA
to be deleted.
< ma-name >: name of MA
to be deleted.
This enters into MA
configuration mode.
This sets MA protection mode.
The protection link mode can
be only used when md's level
is 0.
The current MA only has
protect vlan an protect link
modes.
This sets MA main vlan.
No matter whether ma's
protection mode is vlan or
link, main vlan of ma need to
be configured.
This sets MA CCM sending
fast and slow mode.
The default is slow.
{slow|fast}set MA allowed
CCM sending packet fast or
slow.
115