ZXR10 5900E Series User Manual (Ethernet Switching Volume)
Command
ZXR10(config-gei_1/x)#
St-
Command
ep
1
ZXR10(config-gei_1/x)#
enable
2
ZXR10(config-gei_1/x)#
disable
3
ZXR10(config-gei_1/x)#
action discard
4
ZXR10(config-gei_1/x)#
action
5
ZXR10(config-gei_1/x)#
action shutdown
6
ZXR10(config-gei_1/x)#
action
48
Confidential and Proprietary Information of ZTE CORPORATION
Note:
Bridge and port priority of ZXR10 5900E must be configured after
the instance has been created.
Excluding a Port from Spanning Tree
Calculation
In some cases, it is necessary to exclude a port from spanning tree
calculation such as uplink port of switch or the port connecting to
PC.
spanning-tree {enable|disable}
BPDU Protection
Configuration
Configuring BPDU Protection on
Edge Port
spanning-tree edged-port
spanning-tree edged-port
spanning-tree bpduguard
no spanning-tree bpduguard
spanning-tree bpduguard
no spanning-tree bpduguard
Function
This excludes a port from
spanning tree calculation
Function
This changes a port into edge
port.
This closes edge port.
This configures port is in
discard state after enable
BPDU protection function.
This deletes discard state.
This configures port is in
shutdown state after enable
BPDU protection function.
This deletes shutdown state.